ST1000Face Mask 3 layer

Inner layer: Mesh, 100% polyester
Middle layer: Single jersey , 100% cotton
Outer layer: Isoli , 65% cotton / 35% polyester

Coated metal nose clip which is sewn into the mask
Adjustable straps for the ears.

Washable at 60°C

Suitable for printing

The mask is not for medical use

We recommend that you wash the mask before use
_______________________________________________________________________________________
We have chosen to use 3 different materials for ST1000 Face Mask, each layer has its own quality.

The inner layer is mesh, which is often used for sportswear as it helps to conduct moisture away from the body, and in this case, away from your face.

In the middle, there is a layer of single jersey that helps to absorb and retain moisture.

The outer layer is a brushed isoli where the inside absorbs moisture and the outside prevents moisture from penetrating.
It has a round shape over the nose and mouth to provide a spacious fit. It shapes around the chin and fits well on both large and small faces.

The edge is finished with mesh piping which is soft against the skin. The piping continues and turns into ear straps.

The ear straps have a soft plastic bead that holds the straps in place. After you have found the correct length of the straps you can tie a knot and cut off the extra length if you like.

The nose clip helps to keep the mask in place and close to the nose. This is an advantage especially if you wear glasses, so they do not fog up